Advanced ROV tooling and equipment for efficient subsea operations

Jupiter Torque Tool Class 1-4

The Jupiter Subsea Intelligent Hydraulic Torque Tool (Class 1-4 Rotary Docking) interfaces seamlessly with subsea production systems, including customized interfaces where only the end effector socket varies. It delivers up to 2711Nm (2,000 lbf-ft) of torque and features a hydraulic motor, a planetary gearbox with selectable torque modes, and spring-loaded, multi-class sockets. Additionally, the tool […]

Jupiter Torque Tool Control System

The Jupiter2 Torque Tool Control System provides precise, repeatable control of Torque Tools for high-integrity applications, featuring a single valve pack with integrated proportional control. Compact and cost-effective, it is compatible with hydraulic Torque Tools on any Work Class ROV, controlled through Jupiter GUI software on a PC or laptop, requiring only power and communication […]

Jupiter Torque Tool Class 5

The Jupiter Subsea Intelligent Torque Tool – Class 5 Rotary Docking integrates with subsea production systems, including custom interfaces with varying end effector sockets, and delivers torque up to 6,780Nm (5,000 lbf-ft). It features a hydraulic motor, planetary gearbox, removable end effectors, torque feedback, turns count, optional docking latches, and visual motor turn indicators. Designed […]

Jupiter Subsea Verification Unit Class 1-4

The Zetechtics Jupiter Subsea Control Systems have enabled the creation of a standalone, battery-powered Subsea Torque Verification System, which allows ROV operators to verify torque tool accuracy before or after engaging a client’s valve or subsea actuator. This system interfaces with API17D Class 1-4 torque tool interfaces across three stem sizes and features light sensor […]

Jupiter Subsea Verification Unit Class 5

The Zetechtics Jupiter™ Subsea Torque Tool Control Systems have led to the development of standalone, battery-powered Torque Verification Systems (TVS) available in both subsea and deck configurations, compatible with standard torque tools or project-specific tools. Current TVS options include API 17D Class 1-4, API17H, Petrobras, and Class 5. The Zetechtics Class 5 TVS buckets are […]

Jupiter Manual Low Torque Tool – Type A, B & C

The Manual Torque Tool is designed for ROV manipulator operation on API 17H / ISO 13628-8 Type A, B, and C low-torque rotary valve interfaces. It includes an adjustable torque-limiting clutch to prevent excessive torque application, protecting the valve and stem from damage during interventions. The tool’s end effector is versatile, accommodating both Type A […]

Jupiter Deck Verification Unit Class 1-4

Zetechtics has developed battery-powered Subsea and Deck Torque Verification Systems, enabling ROV operators to verify torque tool accuracy immediately before and after operating a client’s valve or actuator.

RTS Gen 6 Mux

With 15 years of experience with the Gen 5 Mux, and previous generations of ROV sensor interface products, RTS is now developing the next generation survey multiplexer. The Gen 6 is a redesign of the Gen 5, from the ground, to improve reliability, performance, and service friendliness of the unit. The unit is easily operated […]

RTS Fiber Adaptor Pod

The RTS Fiber Adaptor Pod is used to convert the fiber from the RTS Gen 5 / Gen 6 Multiplexer to fit on a Schilling ROV.

RTS Nemo Subsea Navigator

The RTS NEMO Subsea Navigator is a combined subsea Inertial Navigation System (INS) and DVL solution for water depths up to 4000m. The unit is purpose-built for ROV navigation and features state-of-the-art field proven components from renowned subsea manufacturers Exail, Nortek and RTS. NEMO has been designed for maximum reliability with such features as maintenance-free […]

MicroPap (µPAP) Compact acoustic positioning system

µPAP is a small and compact acoustic positioning system for operation from a surface vessel to track ROV’s, tow fish, divers and any other subsea target at ranges to several thousand meters. The system operates in SSBL mode where it measures the distance and direction to subsea transponders and computes a 3D position in local […]

RTS Green Line Laser Gen 2

The RTS Green Line Laser Gen 2 produces a straight green line with uniform intensity over a long range, made possible by its wavelength enabling maximum water penetration. Aligned laser setup provides excellent accuracy for close range inspection and measurements. The RTS Green Line Laser Gen 2 is designed to ensure exceptional stability under varying […]

Oceaneering eTorque Tool Class 1-4

The Universal Electrical Torque Tool by Oceaneering improves operational efficiency by providing precise torque and turn feedback and control. It saves valuable rig time by continuously operating all rotational valves when submerged, eliminating the need for change of motor size, gear steps, or valve interfaces. The eTorque Tool is ultra compact and offers high accuracy […]

RTS Level 360

The new generation RTS Level is a 1-axis full 360 degree high precision level for ROV’s and Divers. The Level 360 can measure both vertical and horizontal planes. By utilizing technology from the RTS TEXT subsea display the unit delivers unparalleled visibility and is capable of 70+ hours of continous subsea operation per charge cycle. […]

RTS Gen 5 MUX System 3000TI

The Gen 5 MUX has rapidly manifested itself as the preferred high end ROV multiplexer solution in the industry. The MUX covers the increasing demand for accurate, flexible and robust subsea data transfer combined with user-friendly interfacing. Offered models and options allow for supplementary functions such as Composite and HD video, fibre assembly adaptors and channel customization. The […]

6 port Multi-Fluid Injection skid

The 10,000psi Fully Proportional Injection System (FPIS) has been designed specifically for pressure testing applications on subsea manifolds. The 6-Output Station is a fully isolated media pumping unit which allows the user to be able to supply a separate media at varying flows up to 8.7 lmin and varying pressures from 0- 10,000 psi (690 […]

RTS LEVEL

The RTS LEVEL is a high-precision subsea inclinometer for ROVs and divers. By utilizing technology from the RTS TEXT subsea display the unit delivers unparalleled visibility and is capable of 70+ hours of continous subsea operation per charge cycle. The unit also features an optional external input which can interface up to two sensors. The […]

BOP Shutdown Skid

The ROVQUIP BOPSS Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Triton XLX ROV as standard but can be adapted to any other work class ROV. The BOP Shutdown Skid was designed to deliver a tool and the necessary fluid required to deliver high flow […]

Dynaset HPW 220

The Dynaset HPW high pressure water pump transforms the hydraulic power of a work machine effectively into high pressure water power. Small size, light weight and durable construction make the HPW pump very cost effective. The HPW pump is an excellent tool in daily ROV tooling cleaning work and other works, where reliable high pressure […]

RTS MetStab XL

The MetStab XL has the same high precision interface solution as the MetStab but with an increased diameter which allows for larger and heavier modules to be integrated without compromising the accuracy of the stab. The male and female stab can be easily locked and unlocked using the ROV handle. The MetStabXL allows for very […]

Fluid injection skid

The ROVQUIP standard ROV Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Triton XLX ROV as standard but can be adapted to any other work class ROV. The Fluid Injection Skid is designed for various pressure testing and fluid injection applications subsea. It comes with […]

RTS MetStab

The RTS MetStab Metrology Stab has been designed based on years of experience with different mechanical subsea interfacing solutions. The unit features unrivaled mating precision and repeatability to ensure objects or subsea equipment is placed correctly in all axes. A special ROV- or diver-operable locking mechanism ensures vertical locking of the male stab during critical […]

Gasket Removal Tool

The Gasket Removal Tool is designed to remove and replace the AX and VX type gaskets inside the wellhead. The tool is positioned in the wellhead with the ROV manipulators and the piston is actuated, extending the shoes to the inner wall of the gasket. The hydraulic pressure from the cylinder and textured face of […]

HP690-Hydraulic Intensifier panel

The HP690 features a unique integrated safety circuit that automatically bleeds excess pressure caused by surfacing or temperature variation back to tank.

RTS AXIS

The RTS AXIS is a high-accuracy subsea pitch and roll sensor. The unit provides an absolute accuracy of 0,1 degrees from -45 to +45 degrees across both axis with exceptional repeatability. This makes the RTS AXIS an excellent choice for checks and verifications during subsea inspection and construction work. The 4000 meter rated titanium housing, […]

Hydrate Remedition Skid

The ROVQUIP HRS Hydrate remediation skid  was developed to offer a 4-stage solution to Hydrate Remediation Operations. The system can switch between: Methanol Injection up to 10,000 psi Heat Injection 50 – 60 degrees above ambient High pressure heat jetting 3,000 psi De-Pressurisation operations The system has proven itself successfully in field operations The heat […]

RTS IRIS 4K Subsea Camera

The RTS IRIS is a cutting edge 4K HD subsea camera rated to 6000 meter water depth. It provides the user with exceptional quality video or images in up to 4K resolution. In addition to superior optics, IRIS is delivered in a robust titanium housing and can be utilized on a wide range of subsea […]

Hydraulic Fluid Compensators

The compensators are designed to have a small footprint with ease for mounting. With built in Heli-coils on each side of the main body the compensator can be mounted without any additional bracketry. They are designed to provide submerged vehicles with a positive pressure of incompressible fluid to protect them against seawater ingress. Built with […]

Schilling T4

The Schilling T4 manipulator is widely regarded as the industry’s premier system that offers the optimum combination of dexterity and strength required to perform fine movements and more complex tasks. Hundreds of TITAN manipulators are in use worldwide every day, and are the predominant manipulator of choice for work-class ROV systems. Constructed mostly from titanium, the T4 is uniquely […]

Hydraulic Operated Ball Valve

The Hydraulic Ball Valve utilises a hydraulic cylinder to open and close the ball valve fitted to the tool. This allows the valve to be operated remotely without the ROV manipulators. These are commonly used for pressure testing applications. The standard valve comes with 4 JIC fittings, 1/4” NPT Female thread, however, different sizes of […]

Super Grinder

The ROV based cutting tool is a super grinder which is designed for effective and precise cutting. Blades for both steel and concrete is available on request. Our grinders are supplied as standard with special coarse blades with longer life span than normal blades.

Gas Sampler

The Gas sampler delivered with transparent measuring pipe to decide leak rate and one sampling bottle for recovery of gas samples to the surface. This sampler unit is hydraulic operated by the ROV.

ISO Docking Frame

The ISO Docking Frame is mounted to the front of an ROV by bolting the supplied frame brackets to the front table of the ROV system. The frame comes with 2 x ISO docking latches and operational hoses to connect to the ROV valve pack. Specific interface requirements can be made available if discussed during […]

Low Pressure Jetting System

The Low-Pressure Water Jetting System is a cost effective, reliable solution based around a Hypro water pump. It has a maximum flow of 435 LPM. It can also be used to control the flow of soft fluid reservoirs.

Webtool™ HCV270

The cutter is intended for use on Coflexip type riser and will cut hose up to 270mm diameter. It may be used on alternative materials, such as electrical power or communication cables, up to a maximum of 200mm diameter. Where small diameters are to be cut, effort should be made to place the material centrally along the anvil to minimise […]

Manip Mounted Diamond Wire Saw

The manipulator mounted Diamond Wire Saw is a lightweight easy deployed cutting tool. The tool is designed for mounting onto a Rigmaster manipulator using the wrist bolts for quick installation. This also means the tool can be stowed when not in use. During cutting operations, the Jaws are used to secure the ROV to the […]

Manipulator Mounted Saw

The manipulator mounted cutter comes with a 14” Tungsten Carbide saw blade. The tool is designed for mounting onto a Rigmaster manipulator using the wrist bolts for quick installation. During cutting operations, the Jaws are used to secure the ROV to the cut and once secure the motor starts by spinning the blade before actuating […]

RTS Gen 5 OCTO

Based on the technology of the Gen 5 MUX, RTS now introduces the Gen 5 OCTO Multiplexer. The OCTO features a significant reduction in size and weight while still supplying eight channels of high speed serial comms, ethernet and optional 3G HD or Composite Video through a single-mode fiber. The rugged yet compact 3000 MSW rated titanium housing […]

ICS 890 Chainsaw

The ICS 890 Series hydraulic power cutting system offers the superior strength of FORCE4® technology. From the redesigned, more durable rear handle, to the easy to replace drive sprocket, this power cutter is engineered to stand up to your toughest jobs. The flush version cuts within 3/16” of a wall or floor.  This package exceeds industry […]

Manual Torque Tool

The Manual Torque Tool is designed to allow the ROV manipulator operation of API 17D, ISO 13628-8 Class 1-4 rotary torque interfaces. The tool limits the torque that can be transmitted from the ROV manipulator to the valve stem during an ROV intervention operation, mitigating against the possibility of excessive torque being applied, ensuring damage […]

Methanol Injection Skid

The ROVQUIP standard ROV Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Triton XLX ROV as standard but can be adapted to any other work class ROV. The Methanol Injection system has been designed to inject Methanol at high pressure subsea via a client provided […]

Kongsberg cNODE Maxi Float Collar

Float collar for the cNODE Maxi Transponder

Multipurpose ROV Skid

The ROVQUIP ROV Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Forum XLX & UHD ROV systems as standard. The Skid is constructed from a lightweight aluminum frame and has been designed to maximize available space whilst still providing positive buoyancy. It is protected with […]

Kongsberg cNODE MiniS Float Collar

Float collar for the cNODE miniS Transponder

Piston Reservoirs

The Piston Reservoir provides fluid storage for the operation of other pieces of ROV tooling equipment on board an ROV Skid. The Piston Reservoir operates in a similar manner to a double-acting cylinder. When the reservoir is full of delivery fluid, the piston is fully retracted. As the reservoir begins to deliver fluid, seawater is […]

0-100 l/min Dirty Work Pack (DWP)

The 100 L/min Dirty Work Pack (RQ-083) is designed to protect the hydraulic circuit of the ROV against external contamination during fluid transfer operations. It utilises a hydraulic motor powered by the ROV hydraulic circuit to drive a pump which supplies the delivery fluid from an external compensated reservoir. This configuration isolates the ROV hydraulic […]

Rotary Cleaning Brush

The Rotary Brush Cleaning Tool is an ROV operated motorised brush designed to clean out 12 ½ inch subsea wellheads. The rotary brush is driven by a hydraulic motor capable of reaching speeds of up to 400 rpm. The motor is also bi-directional can rotate clockwise and counter-clockwise. A case drain port on the hydraulic […]

0-120 l/min Dirty Work Pack (DWP)

The 120 L/min Dirty Work Pack (RQ-071) is designed to protect the hydraulic circuit of the ROV against external contamination during fluid transfer operations. It utilises a hydraulic motor powered by the ROV hydraulic circuit to drive a pump which supplies the delivery fluid from an external compensated reservoir. This configuration isolates the ROV hydraulic […]

Soft Fluid Reservoirs

ROVQUIP Fluid Reservoir Bladders are made from fabric reinforced, high strength rubber and can used in a wide variety of subsea tasks. They are a cost-effective solution to handling fluid operations subsea. Our reservoir bladders can be made to fit a specific skid gap, or we can provide a range of standard reservoir sizes to […]

10 000 PSI Injection system

The 10,000psi Fully Proportional Injection System (FPIS) has been designed specifically for pressure testing applications on subsea manifolds. The 6-Output Station is a fully isolated media pumping unit which allows the user to be able to supply a separate media at varying flows up to 8.7 l/min and varying pressures from 0 – 10.000 psi […]

Suction pads

Suitable for handling large and heavy sheets, such as glass and metal, with a flat or slightly concave surface.

10k Isolated Hydraulic Power Unit (IHPU)

The 10,000psi IHPU is a versatile tool that can be used for numerous subsea applications including; Operating BOP Tooling, Transferring Media and Pressure Testing. The output pressure is directly proportional to the output pressure. This allows the output to be adjusted from 0 – 10,000 psi (~690 Bar). The pump can be connected to any […]

Topside Fluid Transfer Pump

The Topside Fluid Transfer Pump is an air powered, low pressure, high flow pump that provides a means of fluid transfer for topside operations. The pump is a versatile unit that can be used for numerous operations, for example, priming the reservoirs on an ROV skid. The pump is designed to handle a variety of […]

17″ Subsea Rotary Cutter

The 17” Rotary Cutter uses strong Steel jaws to securely clamp on to various structures and cut material from a minimum of 10 inches and up to a maximum of 17 inches in diameter (Slight tool modifications can be conducted for larger cuts). The jaws are actuated by two hydraulic rams and are adjustable over […]

Track Base ROV Skid (RQ-118)

The ROVQUIP tracked skid is the ultimate tool for ultra-shallow water survey and manipulator operations. With a few simple connections the WROV goes from free swimming to tracked mode allowing the ROV to work on the seabed through currents where ‘free flying’ isn’t possible. The skid comes equipped with a dedicated 10 station valve pack […]

Upright Flying Lead Orientation Tool

The Forum Subsea FLOT tool is designed to operate in conjunction with a torque tool and is used to orientate and guide flying leads into the stab plate connections. The FLOT tool is designed to take the FORUM Class 1-4 torque tool but can easily accommodate similar tools from other manufacturers. A rotary actuator allows […]

Valve packs

Our Valve Packs were designed on the back of our growing demand for quality, reliable products for upgrading our ROV systems. These compact lightweight products can be tailored to the individual needs of any application. The units can be built with on / off solenoid valves, proportional or mixture of valve configurations to suit the […]

RTS Hook

The Softsling Hook is designed to ease handling of softslings with ROV and is especially handy when handling slings around pipelines, structures etc. on the seabed.

Kongsberg cNODE MiniS

Kongsberg Maritimes cNODE MiniS Transponder, the most advanced HiPAP mini SSBL and LBL transponder developed to date. The cNODE MiniS, with an impressive range of features, 500+ Cymbal digital acoustic channels and backwards compatability, supercedes the Mini MST. The Kongsberg Maritimes  cNODE® MiniS transponders are used with HiPAP®, cPAP® and μPAP® systems in underwater positioning […]

Nortek DVL1000 (1000kHz/4000m)

The DVL 1000 is the world’s smallest survey grade DVL. It combines compact design with unprecedented functionality, being able to fly higher in the water column and closer to the seabed than similar equipment. It has a maximum operational depth of 4000 m and is ideally suited for subsea navigation where size and weight are […]

Sonardyne 6G Micro Compatt

Micro Compatt 6 is our smallest ever LBL transponder. Designed for short duration missions such as spoolpiece metrology or dynamic mobile mapping, Micro Compatt 6 is perfect for installation on Inspection-class ROVs where payload is limited. Its small size also means that a Work-class ROV can deploy multiple units in one trip to the seabed […]

Schilling ATLAS 7R

This manipulator has been designed to lift heavy loads, while being lightweight and easy to control. The Schilling ATLAS arm has six degrees of freedom and a high lift capacity (250kg at full extension). The ATLAS provides operators with the freedom and strength to perform a wider range of heavy duty tasks in harsh subsea […]

RTS Knife

The RTS knife is designed for cutting ropes, softslings etc. without having to us hydraulic cutters. The knife comes with a fishtail handle as standard but other handles can fitted on request.

Sonardyne Syrinx DVL

Syrinx is a 600 kHz Doppler Velocity Log (DVL) for surface and subsea vehicles. It combines the high altitude, high resolution features of 300 kHz and 1200 kHz DVLs in a single, easy to install navigation instrument. The adaptive bottom lock technology inside Syrinx provides consistency and reliability over challenging and changing topography and works […]

Tritech Gemini 720is

The 720is is the latest generation from Tritech’s renowned multibeam sonar range and offers a real-time, high frequency imaging solution. The Gemini 720is operates at 720kHz and this combined with Tritech’s state-of-the-art processing electronics, produces images of superb clarity. This latest design is ideal for pan and tilt mounting on observation class work and survey […]

Lateral FlexiClean

FlexiClean is a highly efficient patent-applied-for ROV-deployed cleaning tool that quickly removes marine growth and debris on underwater structures and equipment. It rapidly and gently removes soft marine growth, mussels, barnacles and coral while leaving sensitive surfaces such as paint, plastic sheathing or even duct tape unharmed.

Hydro-Lek HLK-4600 Pan & Tilt

The HLK-4600 Camera Boom Arm has been designed for pipeline inspection work. Using a pair of these arms, pipelines of up to 36” can be easily inspected. Its unique design allows the camera mount to stay at the same angle through the entire 120° of angular movement of the arm, without any adjustment. The camera mount can be tilted […]

Imenco Hammerhead Shark Colour Zoom Camera

The Hammerhead wide angel colour zoom camera is used as main camera on work class ROVs. Praised by major operated wold wide of being a reliable and professional wide angle zoom camera. The Hammerhead Shark has 60⁰ wide angle lens and 18x optical zoom. Giving high quality video images and good control options by using […]

Imenco SeaLED 20

The Imenco SeaLED 20 miniature high output subsea light for diverse/small ROV/tools and inspection points. Fitted with the latest high quality LED producing an increased lifespan compared to the traditional Halogen and HID lights. SeaLED 20 can be delivered with different colour temperatures and lens angles. The light output is easily regulated from 0-100%.

Imenco Underwater Laser

The IMENCO Underwater Green Laser is intended for ROV use only where measurements are needed from video images. The green light ensures good visibility even at long distances due to less absorption of green light in water.   By paralleling two lasers, calibrated at set distance, accurate measurements from video images is possible. The 150 […]

Imenco Whitetip Shark Colour Zoom Camera

Ideal for any ROV work and often used as a tool camera for close up inspections where illumination is required this colour camera is rated up to 4000msw has 10x optical zoom, 15 dimmable LED lights and RS232 control. Available in Duplex Stainless Steel.

Exail GAPS USBL

The Exail fourth-generation pre-calibrated GAPS combines high performance ultra-short baseline (USBL) and a fiber-optic gyroscope (FOG) inertial navigation system (INS) in the same housing to provide accurate position of any subsea object, in diverse and challenging environments. Its performance ranges from extremely shallow water to deep sea. Its compact and all-in-one design allows both portable […]

Exail Octans 3000

OCTANS 3000 is a subsea survey-grade gyrocompass and complete motion sensor for water depths up to 3,000 m. Based on Exail’s fiber-optic gyroscope (FOG) technology it outputs heading, roll, pitch, heave, rate of turn and acceleration. OCTANS 3000 can be easily upgraded to full INS mode (i.e. ROVINS).

Exail PHINS 6000 Subsea

PHINS 6000 is a subsea inertial navigation system (INS) providing position, true heading, attitude, speed, depth, and heave for deep water operations. Its high-accuracy inertial measurement unit is coupled with an embedded digital signal processor that runs an advanced Kalman filter. PHINS DVL Ready is pre-assembled and pre-calibrated with a Doppler velocity log version making […]

Exail ROVINS

ROVINS is a combined survey-grade full featured Inertial Navigation System (INS) for water depths up to 3,000m. Designed specifically for offshore survey and construction works, ROVINS improves the efficiency of all operations where accurate position, heading and attitude are key benefits.

Kongsberg cNODE Maxi

The Kongsberg cNODE Maxi is the largest members of the cNODE transponder family. The cNODE Maxi design is very modular and covers a large range of  applications with its variety of different transducers, internal and external sensors, housing materials and other add-on functions. New configurations and software can easliy be downloaded from the Transponder Test and Configuration […]

Kongsberg cNODE Midi

cNODE® is a new family of transponders for underwater acoustic positioning and data link. They have more than 100 channels available, and can all be positioned by HiPAP® underwater positioning systems. Each underwater target to be positioned must have a transponder or a responder installed. The transponder operates acoustically while the responder requires a cable […]

Kongsberg HiPAP 350P

This is the brand new member of the HiPAP family. With its unique, new and compact transducer containing “a complete transceiver” and an accurate Motion Reference Unit, it will bring a new era into the underwater positioning services for “vessels of opportunity”. It is the only automatic beam steering portable transducer in the market. The […]

Kongsberg Mini Float Collar

Kongsberg MST 319/324/342 Mini SSBL Transponders

The Mini SSBL transponders (MST) are medium frequency mini-transponders. The MST transponders are to be used with the following underwater positioning and navigation systems: HiPAP system HPR series It is to be used for applications where a small and lightweight unit is required. A MST transponder is delivered with a moulded protective plastic coating. Uncoated units are available as an […]

RTS Gen 5 MUX System 3000TI-2HD

The Gen 5 MUX has rapidly manifested itself as the preferred high end ROV multiplexer solution in the industry. The MUX covers the increasing demand for accurate, flexible and robust subsea data transfer combined with user-friendly interfacing. Offered models and options allow for supplementary functions such as Composite and HD video, fibre assembly adaptors and channel customization. The […]

RTS Gen 5 MUX System 3000TI-3HD

The Gen 5 MUX has rapidly manifested itself as the preferred high end ROV multiplexer solution in the industry. The MUX covers the increasing demand for accurate, flexible and robust subsea data transfer combined with user-friendly interfacing. Offered models and options allow for supplementary functions such as Composite and HD video, fibre assembly adaptors and channel customization. The […]

RTS Green Line Laser

The RTS Green Line Laser produces a straight green line with uniform intensity over a long range, made possible by its wavelength enabling maximum water penetration. Aligned laser setup provides excellent accuracy for close range inspection and measurements in ROV operations. The RTS Green Line Laser is designed to ensure exceptional stability under varying and […]

RTS TEXT Subsea Display

The new RTS Subsea Display features leading edge functionality and sought after improvements for displaying information subsea. The RTS Engineering team introduces a unit that will provide unparalleled visibility, flexibility and up to one-tenth of the power consumption of existing product solutions. Features such as automated light sensitive startup, bar graph display, limit value indication and customized colors supplies […]

Seatronics SeaVISION II

The equipment provides a reliable, secure one-way digital link for video, audio and data over a range up to 38* kilometres. The type of modulation used (COFDM) and the use of diversity reception make the link very resistant to multipath problems, giving excellent performance in mobile applications and normally difficult locations

Stanley GR29

The GR29 is a rotary Grinder/Cutter/Buffer capable of using discs up to 9” Diameter. The system is supplied with a tooling control block and hoses for connection to the ROV. The unit is also supplied with an adaptor plate that will allow the fitting of 6”, 8” & 12” hard nylon brushes for hub cleaning and marine growth removal.

Stanley IW12

The Stanley IW12 is a medium duty ¾” square drive impact wrench designed for underwater bolting and drilling applications. Powered by a Stanley integral Hyrevz motor, the IW12 has a durable swing hammer impact mechanism with adjustable impact intensity from 250 to 1200 ft lbs (340 to 1632 Nm) of torque. Designed to run from a wide range of hydraulic […]

Teledyne Bowtech Surveyor-HD PRO Ultra-wide Angle Camera

The Bowtech Products SURVEYOR-HD PRO ultra-wide angle underwater HDTV camera is designed to provide the viewer a greater angle of view, from the standard Surveyor HD, whilst remaining compact and very competitively priced. The camera is ideal for ROV inspection tasks, scientific observation and broadcast applications. Video output is available as HD or HD-SDI over […]

Teledyne TSS Saturn 30

The latest generation of marine navigation systems… The Saturn fibre optic gyrocompass capitalises on more than a century’s experience in marine navigation. Teledyne TSS’ own experienced and innovative engineering team has combined the latest solid state technologies and calibration techniques to offer a user-friendly, highly accurate and cost-effective navigation solution for demanding marine environments. The […]

Tritech AnchorZip 10

The Tritech AnchorZip 10 is a unique product which has been developed using the highly successful ZipPump and ZipJet technologies. The AnchorZip 10 is a heavy duty suction anchorpump designed for workclass vehicles able to produce 25hp of hydraulic power. The AZ10 will offer a very quick and cost effective way of installing and removing suction anchors. Output pressures may […]

Tritech Merlin

The new 35 – 60 h.p. Merlin excavation pump is the must have successor to the Excalibur. Merlin incorporates many of the improved design features introduced on the small Super ZipJet pump which has proven to be so successful. The pump is smaller, lighter and more robust with greater performance in both excavation and jetting functions. It features the same […]

Tritech Super ZipJet

The Super ZipJet incorporates many technical advances over the previous generation of ROV suction and jetting systems. Considerable emphasis has been placed on increasing efficiency in both the suction and jetting modes. The Super ZipJet incorporates several design features, which improve its reliability and substantially reduce its maintenance costs. Also, it will not block or jam because there are no […]

Webtool™ HCV100

The HCV100 is a lightweight double acting cutting tool primarily intended for use on umbilical cable and hose and will cut up to 100mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 100mm diameter. It may be mounted on an ROV or manipulator arm. Where small […]

Webtool™ RCO40LP

The   Webtool  38mm  cutter   is   a   hydraulically operated, double acting wire cutter. The RCO40LP can cut wire rope with a minimum 25mm  diameter,  maximum  tensile  strength  of 1960N/mm up to a maximum 38.1mm diameter with a maximum tensile strength of 1960N/mm. It can also be used to cut cables of similar material, such as electrical […]

Webtool™ RCO54

The RCO54 is a double acting tool primarily intended for use on steel wire rope, having a maximum tensile strength of 1960N/mm, up to 54mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 54mm diameter.

Webtool™ RCV115

The RCV115 is primarily intended for use on steel wire rope, having a maximum tensile strength of 1880N/mm and will cut ropes up to 115mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 115mm diameter. Where smaller diameters are to be cut, effort should be made […]

Webtool™ RCV135

The RCV135 is intended for use on steel wire rope having a maximum tensile strength of 1770N/mm and will cut ropes up to 135mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 135mm diameter. Where smaller diameters are to be cut, every effort should be made […]

Webtool™ RCV155

The RCV155 is primarily intended for use on steel wire rope, having a maximum tensile strength of 1880N/mm and will cut ropes up to 155mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 155mm diameter. Where smaller diameters are to be cut, effort should be made […]

Webtool™ SL135

The SL135 softline cutter is a double acting tool suitable for cutting softlines and ropes up to 127mm (5”) in diameter. It requires a dual line hydraulic supply for operation and is suitable for use subsea.

Webtool™ SL55

The SL55 Softline cutter is a double acting tool suitable for cutting softlines and ropes up to 55mm (2.165”) in diameter.

Webtool™ SL80

The SL80 softline cutter is a double acting tool suitable for cutting softlines and dyneema /aramid ropes up to 80mm (3 1/8”) diameter.

Webtool™ WCOS38DLP

The WCOS38DLP is a low pressure heavy duty wire rope cutter designed for subsea deployment in severe working conditions.

Webtool™ WCS75HDZ

The WCS75HDZ cutter is designed with a fully retractable anvil allowing for simplified cutting of continuous lengths of wire rope.