All products
Filter by category and type
6 port Multi-Fluid Injection skid
Availability: Rental
The 10,000psi Fully Proportional Injection System (FPIS) has been designed specifically for pressure testing applications on subsea manifolds. The 6-Output Station is a fully isolated media pumping unit which allows the user to be able to supply a separate media at varying flows up to 8.7 lmin and varying pressures from 0- 10,000 psi (690 […]
Valve packs
Availability: Rental
Our Valve Packs were designed on the back of our growing demand for quality, reliable products for upgrading our ROV systems. These compact lightweight products can be tailored to the individual needs of any application. The units can be built with on / off solenoid valves, proportional or mixture of valve configurations to suit the […]
Manual Torque Tool
Availability: Rental
The Manual Torque Tool is designed to allow the ROV manipulator operation of API 17D, ISO 13628-8 Class 1-4 rotary torque interfaces. The tool limits the torque that can be transmitted from the ROV manipulator to the valve stem during an ROV intervention operation, mitigating against the possibility of excessive torque being applied, ensuring damage […]
Upright Flying Lead Orientation Tool
Availability: Rental
The Forum Subsea FLOT tool is designed to operate in conjunction with a torque tool and is used to orientate and guide flying leads into the stab plate connections. The FLOT tool is designed to take the FORUM Class 1-4 torque tool but can easily accommodate similar tools from other manufacturers. A rotary actuator allows […]
Track Base ROV Skid (RQ-118)
Availability: Rental
The ROVQUIP tracked skid is the ultimate tool for ultra-shallow water survey and manipulator operations. With a few simple connections the WROV goes from free swimming to tracked mode allowing the ROV to work on the seabed through currents where ‘free flying’ isn’t possible. The skid comes equipped with a dedicated 10 station valve pack […]
Multipurpose ROV Skid
Availability: Rental
The ROVQUIP ROV Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Forum XLX & UHD ROV systems as standard. The Skid is constructed from a lightweight aluminum frame and has been designed to maximize available space whilst still providing positive buoyancy. It is protected with […]
Hydrate Remedition Skid
Availability: Rental
The ROVQUIP HRS Hydrate remediation skid was developed to offer a 4-stage solution to Hydrate Remediation Operations. The system can switch between: Methanol Injection up to 10,000 psi Heat Injection 50 – 60 degrees above ambient High pressure heat jetting 3,000 psi De-Pressurisation operations The system has proven itself successfully in field operations The heat […]
BOP Shutdown Skid
Availability: Rental
The ROVQUIP BOPSS Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Triton XLX ROV as standard but can be adapted to any other work class ROV. The BOP Shutdown Skid was designed to deliver a tool and the necessary fluid required to deliver high flow […]
Low Pressure Jetting System
Availability: Rental
The Low-Pressure Water Jetting System is a cost effective, reliable solution based around a Hypro water pump. It has a maximum flow of 435 LPM. It can also be used to control the flow of soft fluid reservoirs.
Dynaset HPW 220
Availability: Rental
The Dynaset HPW high pressure water pump transforms the hydraulic power of a work machine effectively into high pressure water power. Small size, light weight and durable construction make the HPW pump very cost effective. The HPW pump is an excellent tool in daily ROV tooling cleaning work and other works, where reliable high pressure […]
ISO Docking Frame
Availability: Rental
The ISO Docking Frame is mounted to the front of an ROV by bolting the supplied frame brackets to the front table of the ROV system. The frame comes with 2 x ISO docking latches and operational hoses to connect to the ROV valve pack. Specific interface requirements can be made available if discussed during […]
Topside Fluid Transfer Pump
Availability: Rental
The Topside Fluid Transfer Pump is an air powered, low pressure, high flow pump that provides a means of fluid transfer for topside operations. The pump is a versatile unit that can be used for numerous operations, for example, priming the reservoirs on an ROV skid. The pump is designed to handle a variety of […]
Gasket Removal Tool
Availability: Rental
The Gasket Removal Tool is designed to remove and replace the AX and VX type gaskets inside the wellhead. The tool is positioned in the wellhead with the ROV manipulators and the piston is actuated, extending the shoes to the inner wall of the gasket. The hydraulic pressure from the cylinder and textured face of […]
Hydraulic Operated Ball Valve
Availability: Rental
The Hydraulic Ball Valve utilises a hydraulic cylinder to open and close the ball valve fitted to the tool. This allows the valve to be operated remotely without the ROV manipulators. These are commonly used for pressure testing applications. The standard valve comes with 4 JIC fittings, 1/4” NPT Female thread, however, different sizes of […]
HP690-Hydraulic Intensifier panel
Availability: Rental
The HP690 features a unique integrated safety circuit that automatically bleeds excess pressure caused by surfacing or temperature variation back to tank.
Fluid injection skid
Availability: Rental
The ROVQUIP standard ROV Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Triton XLX ROV as standard but can be adapted to any other work class ROV. The Fluid Injection Skid is designed for various pressure testing and fluid injection applications subsea. It comes with […]
Methanol Injection Skid
Availability: Rental
The ROVQUIP standard ROV Tooling Skid is suitable for connection to most work class ROV’s. The pin configuration is to fit the Triton XLX ROV as standard but can be adapted to any other work class ROV. The Methanol Injection system has been designed to inject Methanol at high pressure subsea via a client provided […]
10 000 PSI Injection system
Availability: Rental
The 10,000psi Fully Proportional Injection System (FPIS) has been designed specifically for pressure testing applications on subsea manifolds. The 6-Output Station is a fully isolated media pumping unit which allows the user to be able to supply a separate media at varying flows up to 8.7 l/min and varying pressures from 0 – 10.000 psi […]
0-100 l/min Dirty Work Pack (DWP)
Availability: Rental
The 100 L/min Dirty Work Pack (RQ-083) is designed to protect the hydraulic circuit of the ROV against external contamination during fluid transfer operations. It utilises a hydraulic motor powered by the ROV hydraulic circuit to drive a pump which supplies the delivery fluid from an external compensated reservoir. This configuration isolates the ROV hydraulic […]
0-120 l/min Dirty Work Pack (DWP)
Availability: Rental
The 120 L/min Dirty Work Pack (RQ-071) is designed to protect the hydraulic circuit of the ROV against external contamination during fluid transfer operations. It utilises a hydraulic motor powered by the ROV hydraulic circuit to drive a pump which supplies the delivery fluid from an external compensated reservoir. This configuration isolates the ROV hydraulic […]
Hydraulic Fluid Compensators
Availability: Rental
The compensators are designed to have a small footprint with ease for mounting. With built in Heli-coils on each side of the main body the compensator can be mounted without any additional bracketry. They are designed to provide submerged vehicles with a positive pressure of incompressible fluid to protect them against seawater ingress. Built with […]