Filter by category and type
Super Grinder
The ROV based super grinder is designed for effective and precise cutting. Blades for both steel and concrete is available on request. Our grinders are supplied as standard with special coarse blades with longer life span than normal blades.
RTS Knife
The RTS knife is designed for cutting ropes, softslings etc. without having to us hydraulic cutters. The knife comes with a fishtail handle as standard but other handles can fitted on request.
Hydro-Lek HLK-33600 4”
The HLK-33600 4” Cutter is a self-contained grab, feed and cut unit, which for a weight of only 12Kg can cut pipe, cable or grout hose. This is a significant weight reduction on standard anvil cutters. It can be controlled using standard Hydro-Lek systems or directly from a work class ROV. Constructed principally from 316 […]
Hydro-Lek HLK-33625 6”
The HLK-33625 6” Cutter is a self-contained grab, feed and cut unit, which for a weight of only 13Kg can cut pipe, cable or grout hose. This is a significant weight reduction on standard anvil cutters. It can be controlled using standard Hydro-Lek systems or directly from a work class ROV. Constructed principally from 316 stainless steel, the grab grips […]
Hydro-Lek HLK-33800
The HLK-33800 cutter is a compact hydraulic cutter capable of cutting 25mm steel wire rope and up to ½” steel bar. Fitted with a 4:1 ratio intensifier the unit can be operated from a 140 bar hydraulic supply.
Hydro-Lek HLK-33900
The HLK-33900 Cutter is a compact hydraulic cutter constructed from 316 & 17-4PH stainless steel and is capable of cutting 38mm diameter stainless steel wire rope. It can be mounted in a frame which can be bolted to the HD & RHD series Hydro-Lek Manipulator Arm Slew Mount. Alternatively it can be mounted into a “T Handle” frame […]
Hydro-Lek HLK-90130
The HLK-90130 Power pack is a three phase powered unit which can be supplied for operation on either 440 or 660 Volts. The motor is fitted within an oil-filled, pressure compensated housing, which is separate to the pump and reservoir. The pump has an oil filter fitted to prevent contamination from being circulated through the hydraulic system.
J2 Subsea S180 Secateurs
The S180 is a secateur style cutter capable of cutting scaffold tubing, steel bar and wire rope. Max cutting force 1100KN.
Stanley GR29
The GR29 is a rotary Grinder/Cutter/Buffer capable of using discs up to 9” Diameter. The system is supplied with a tooling control block and hoses for connection to the ROV. The unit is also supplied with an adaptor plate that will allow the fitting of 6”, 8” & 12” hard nylon brushes for hub cleaning and marine growth removal.
Webtool™ HCV100
The HCV100 is a lightweight double acting cutting tool primarily intended for use on umbilical cable and hose and will cut up to 100mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 100mm diameter. It may be mounted on an ROV or manipulator arm. Where small […]
Webtool™ HCV270
The cutter is intended for use on Coflexip type riser and will cut hose up to 270mm diameter. It may be used on alternative materials, such as electrical power or communication cables, up to a maximum of 200mm diameter. Where small diameters are to be cut, effort should be made to place the material centrally along the anvil to minimise […]
Webtool™ RCO40LP
The RCO40LP is a double acting tool primarily intended for use on steel wire rope, having a maximum tensile strength of 1960N/mm and will cut ropes up to 38mm diameter. The cutting range begins at 25mm diameter wire rope with a maximum tensile strength of 2160N/mm up to 38mm diameter with maximum tensile strength of 1960N/mm. IMPORTANT: Please note this tool […]
Webtool™ RCO54
The RCO54 is a double acting tool primarily intended for use on steel wire rope, having a maximum tensile strength of 1960N/mm, up to 54mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 54mm diameter.
Webtool™ RCV115
The RCV115 is primarily intended for use on steel wire rope, having a maximum tensile strength of 1880N/mm and will cut ropes up to 115mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 115mm diameter. Where smaller diameters are to be cut, effort should be made […]
Webtool™ RCV135
The RCV135 is intended for use on steel wire rope having a maximum tensile strength of 1770N/mm and will cut ropes up to 135mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 135mm diameter. Where smaller diameters are to be cut, every effort should be made […]
Webtool™ RCV155
The RCV155 is primarily intended for use on steel wire rope, having a maximum tensile strength of 1880N/mm and will cut ropes up to 155mm diameter. It may be used on alternative materials, such as electrical power or communication cables, again up to a maximum of 155mm diameter. Where smaller diameters are to be cut, effort should be made […]
Webtool™ SL135
The SL135 softline cutter is a double acting tool suitable for cutting softlines and ropes up to 127mm (5”) in diameter. It requires a dual line hydraulic supply for operation and is suitable for use subsea.
Webtool™ SL55
The SL55 Softline cutter is a double acting tool suitable for cutting softlines and ropes up to 55mm (2.165”) in diameter.
Webtool™ SL80
The SL80 softline cutter is a double acting tool suitable for cutting softlines and dyneema /aramid ropes up to 80mm (3 1/8”) diameter.
Webtool™ WCS75HDZ
The WCS75HDZ cutter is designed with a fully retractable anvil allowing for simplified cutting of continuous lengths of wire rope.